1024x600, 10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi. Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable). Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie).
Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os). Backlight can be turned off to lower power consumption. 4.3inch HDMI LCD (B).
10.1inch HDMI LCD (B). 10.1inch HDMI LCD (H). 11.6inch HDMI LCD (H). 13.3inch HDMI LCD (H) V2.15.6inch HDMI LCD (H). Limited by the game console OS, the touch function is unavailable. Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.
Power positive (3.3V power input). Power positive (5V power input). 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24. 6, 9, 14, 20, 25.
SPI data input of Touch Panel. SPI data output of Touch Panel.Touch Panel interrupt, low level while the Touch Panel detects touching. SPI clock of Touch Panel. Touch Panel chip selection, low active. Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image?Make sure the hardware connection is correct and connects fine. Make sure the image in TF card is burnt correctly. The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Which power supply should I use? It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power. For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD. For more info, please check the wiki page.
2.8inch RPi LCD (A). 3.2inch RPi LCD (C). 3.5inch RPi LCD (B). 3.5inch RPi LCD (C). Pi 3B+ means Raspberry Pi 3 Model B+.
If the LCD is intended to play videos, please choose the one with HDMI display interface for better experience. Toughened Glass Cover : the 7inch HDMI LCD (H) (with case) features toughened glass cover, while the 7inch HDMI LCD (H) uses a normal screen cover. CAUTION: This product is protected by patent, anyone making copies/knock-offs SHOULD be held liable pursuant to law.
Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service. To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing.
10.1inch HDMI LCD x 1. RPi screws pack (4pcs) x 1.
If you want to pay by other way, please contact with us directly. · Your shopping experience is very important to us and our business. · Any question, you are always welcome to contact with us directly, we will reply you asap. The item "1024×600 10.1inch Resistive Touch Screen HDMI I/Os for Raspberry Pi" is in sale since Saturday, July 28, 2018. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\LEDs, LCDs & Display Modules\LCD Display Modules".
The seller is "devkits" and is located in California. This item can be shipped to United States, Canada, Mexico.