3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi

3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi
3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi
3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi
3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi
3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi
3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi

3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi

7.5inch e-Paper HAT (C). 640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white three-color, SPI interface. This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

Compatible with Raspberry Pi 2B/3B/Zero/Zero W. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32). Outline dimension: 170.2mm × 111.2mm.

Display size: 163.2mm × 97.92mm. Dot pitch: 0.255 × 0.255. Display color: yellow, black, white. SPI chip selection, low active.

Data/Command selection (high for data, low for command). Busy status output, low active.

27.60 × 27.60. 48.0 × 33.0. 1.54inch e-Paper Module (B). 1.54inch e-Paper Module (C).

27.51 × 27.51. 48.55 × 23.71. 65.0 × 30.2. 2.13inch e-Paper HAT (B). 2.13inch e-Paper HAT (C). 57.29 × 38.19. 85.0 × 56.0. 2.7inch e-Paper HAT (B). 66.89 × 29.05. 89.5 × 38.0. 2.9inch e-Paper Module (B). 2.9inch e-Paper Module (C). 84.80 × 63.60. 103.0 × 78.5. 4.2inch e-Paper Module (B).

4.2inch e-Paper Module (C). 4.3inch e-Paper UART Module. 88.00 × 66.00. 118.0 × 75.0.

163.20 × 97.92. 170.2 × 111.2. 7.5inch e-Paper HAT (B).

Standard Raspberry Pi header on module, allowed to be attached onto Pi directly, compatible with Raspberry Pi 2B/3B/Zero/Zero W. 7.5inch e-Paper (C) x1.

RPi screws pack (2pcs) x1. PH2.0 20cm 8Pin x1.

We'll try our best to work things out. It's our pleasure to serve you! The item "3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi" is in sale since Sunday, February 11, 2018. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\LEDs, LCDs & Display Modules\LCD Display Modules". The seller is "devkits" and is located in Shenzhen. This item can be shipped worldwide.
3-Color 640x384 7.5inch E-Ink Display Hat e-Paper SPI for Raspberry Pi