7 inch USB HDMI LCD Display Touch Screen 1024x600 w/ Speaker For Raspberry Pi. The viewing Angle is large. Dynamic picture quality is excellent. Energy saving and environmental protection. Resolution for hd 1024X600 dot matrix.It is more delicate than 800X480 ordinary screen. Hardness up to 6H, more durable and more scratch resistant. Built - in power amplifier circuit. Built-in stereo dual speaker system, in the display while dancing with the music. Front key dimming + breathing lamp. The front panel has a set of hidden touch buttons to support one-button adjustment of backlight brightness. The front panel is equipped with a breathing lamp to indicate the working status. Used as a mini PC monitor. Support raspberry pie, Banana Pi, BB Black and other mainstream development board. Support Raspbian, Kali Linux, ubuntu and other mainstream systems, single touch plug and play without driver. Used as a computer display. Support win10/win8/win7 system, support five-point touch plug and play driver.
Download the latest Raspbian image from the official directory and follow the official tutorial steps to install the system. Txt file in the root directory of Micro SD card and add the following code at the end of the file, save and exit the Micro SD card. Hdmi_force_edid_audio=1 max_usb_current=1 hdmi_force_hotplug=1 config_hdmi_boost=7 hdmi_group=2 hdmi_mode=87 hdmi_drive=2 display_rotate=0 hdmi_cvt 1024 600 60 6 0 0 0.
Insert Micro SD card, connect the 7inch HDMI Display (S) to Raspberry Pi , connect the power to boot. Work as HDMI touch monitor. This product can be used as the HDMI touch monitor of Windows computer, only need to connect HDMI interface and TOUCH interface, can normally display and support up to five points touch.This product has stereo speakers and 3.5mm headphone jack , support HDMI audio input, Headset audio output. Equipped with buttons to control the System Settings Menu, the functions are as follows. Short press once, the backlight brightness increases by 10%, after reaching 100%, it will start to cycle from 10%. Long press 3 seconds, backlight off.
Short press again, Restore the brightness before. When there is HDMI signal, press the button, the system starts up, and the breathing lamp turns blue and slowly flashes. Press again, the system shuts down, the breathing light turns red and slowly flashes. Open / Close the System Settings Menu; Return. In the System Settings Menu, Confirm.
Shortcut key, backlight brightness increase. In the System Settings Menu, Up. Shortcut key, backlight brightness reduction. In the System Settings Menu, Down. In the System Settings Menu, Left.
In the System Settings Menu, Right. Without HDMI signal, you won't be able to use the System Settings Menu and volume related shortcuts. When using the speaker external release function, you need to connect to the POWER interface with an external power supply. Otherwise, the display flicker, sound distortion and even shutdown may occur due to insufficient POWER supply. 1 x 7 inch display.
1 x Micro HDMI to HDMI converter. If item is defective after 30 days, you can still send it back to us. We will send you a new one after receiving the defective item.The item "7 inch USB HDMI LCD Display Touch Screen 1024x600 with Speaker For Raspberry Pi" is in sale since Wednesday, March 25, 2020. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\LEDs, LCDs & Display Modules\LCD Display Modules".
The seller is "elecbuy" and is located in Shen Zhen. This item can be shipped worldwide.