Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch

Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch

Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch
Fortune PRO-2 is quite simple to operate, and at the same time a fairly flexible device, in terms of work on any ground it will be very convenient, automatic ground detuning is fast and accurate, but at the same time the display shows a constant signal from the ground in the form of a marker, also and the phase number of the ground is constantly displayed. Now it is clear that the soil, for example, has changed and which way to move it manually, or to rebalance automatically if necessary. Ability to disguise, exclude unwanted metal from search. The main differences between the metal detector Fortune PRO-2 and its predecessors are. Thanks to the use of two processors and optimization of the software, the device became much faster than its predecessors. Speed and separation increase the tenacity to the finds. In Fortune PRO-2, there is no need for a sensor balancing module. The residual unbalance of the sensor up to 4.3V does not affect the operation of the device. In addition, the mode "Analog search" is entered. It became possible to connect two-frequency coils. The two-frequency coil comes complete with a metal detector. The FM-modulator is used for use with FM-headphones. In contrast to MD Fortuna-Pro LCD-display is used, with a white backlight, which is convenient when working in the sun. Discrimination visual indication: the number of VDI, the sinograph, the dynamic scale of the signal strength. Voice target: 90-tone, 4-tone, 2-tone, volume control. Added mode "Beach" to search for fine gold. Balance of soil: manual, automatic. FM transmitter, for connecting wireless headphones. Signal processing speed: very high. Displays the coil searchsensor unbalance. There is no need for a sensor balancing module. Ability to disguise unwanted metal. Adjust the device to the frequency of the existing sensor. Frequency of the device: 4-20 kHz.

Number of profiles for sensors: Four profiles for different search sensors and an additional 2 profiles for two-frequency sensors. The sensor coil DD 25 is two-frequency (in the set 8/12 kHz). LCD display 70x40mm / 2.75x1.57 inches. Case dimensions: 140x99x32 mm / 5.5x3.9x1.2 inches.

Used the improved component base. The latest firmware is available. The main parameters of the assembly. Lithium-ion battery 2200 mAh 3.7V. Collapsible, adjustable rod, lower part - high-impactplastic, the upper part - high strength aluminum, covered with powder paintfactory. The complete set unit is powered by a 3.7 V (lithiumbattery 18650 on 2200 mAh). If your power is made, it can be from 2 to 9 V. Power Connector for plug 325 2 pin. The transducer frequency: 8/12kHz (default).

The spacing between the TX-RX: 2 kHz. The sensor connector pinout is as follows: RX + / RX - / +5V.

/ TX + / TX. Detection range detector Fortune M3 in the air.

DD 250 mm / current 100mA / spacingfrequency of 2 kHz / 3 sens's. 5 kopecks USSR 1981 (on the coin) - 420 mm / 16.2 inch. 3 kopecks 1910 (on the coin) - 370 mm / 14.5 inch. The average detectionrange of air - 320-570 mm / 12.6 - 22.4 inch. (AC/DC ADAPTER, INPUT: AC 100-240V 50/60HZ / OUTPUT: 5V - 1A). The functional control unit of the device: Headphone out, Backlitdisplay and English Menu. FonScan mode, allows you to search for deep objects (similar to the PB-CT function). "Shift VDI" mode allows to draw low-conductive targets, such as small gold and metal-plastic. Added "Beach" mode to search for fine gold. Discrimination regime / all metals. Adjustment of the signal gain from 0% to 100% (input operational amplifier). Overload sound signal and display. Possibility of setting current in TX. Ability to use dual-frequency sensors. The possibility of adjusting the rod. Parcel will be well and securely packed. Contact me with any question. The item "Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch" is in sale since Sunday, October 20, 2019. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detectors". The seller is "cha-valen" and is located in Europe. This item can be shipped worldwide.


Metal Detector Fortune Pro-2 LCD Display with depth of search up to 2m / 57 inch